High Strength Concealable Body Protective Vest Stab Proof Clothing / vest
Introduction
1. General Requirements:
1) Anti puncture clothing consists of an anti puncture clothing jacket, anti puncture layer and anti puncture layer protective cover.
2) Anti puncture clothing materials should be non-toxic and have no natural harm to the human body.
3) Anti puncture clothing should be worn flexibly and easily. After wearing, it is not allowed to restrict the free movement of both arms and the body's movements such as kneeling, jumping, squatting, pitching, and turning.
4) The outer jacket of the anti puncture suit should be compatible with the specifications of the anti puncture layer and should be able to be separated. The inner liner cannot be washed or chemically corroded. The coat cannot be washed at high temperatures. Rinse with warm water and let it dry in a well ventilated area.
The protective cover of the anti puncture layer should indicate the puncture or close fitting surface, and cannot be reversed.
2. Appearance requirements:
1) The anti puncture clothing jacket should be free of defects such as damage, floating lines, and missing needles.
2) The surface of the anti puncture layer material should be free of defects such as holes, deep pits, scratches, cracks, and burrs. Metal materials should be treated with rust prevention, while non-metallic materials should be evenly and flat.
3) The same layer of anti puncture material should be uniform, flat, and consistent, without local protrusions, wrinkles, and other defects.
4) The anti puncture layer consists of multiple layers of anti puncture materials, and the specifications and dimensions of each layer should be consistent.
- The anti puncture clothing should have a clear product logo. The location of the anti puncture clothing logo should be centered 10 cm below the inner neck of the back and on the puncture surface of the anti puncture protective cover.
3. Composition:
The anti puncture clothing fabric is made of 300D waterproof Oxford cloth material and uses a lattice 15 ° cold resistant reflective strip; Stick deep blue letters at the back; Use chemical fiber high brightness reflective cloth with a width of 3.2cm.
One size fits all design with a velcro overlay. Shoulder and waist users can adjust themselves from multiple angles according to their needs, with concealed inner wear and upgraded protection. Can be worn internally or externally.
4. Structure:
The anti puncture layer is a multi-layer high molecular weight polyethylene impregnated fiber anti puncture felt that is pressed by alloy steel hot pressing.
At a height of 7cm on the rear inner hem, use a 2.5cm fluorescent yellow Velcro opening to bond and fit into the inner liner. Do not use 4 double layer fabric carts with a 4cm hook surface to bond the front. The front inner lining is made like the back and installed into the inner liner, with 4 layers of 4 * 11cm Velcro sewn on the inside of the shoulders. Two hanging loops on the chest can be used to hang walkie talkies or law enforcement recorders.
5. The color of the anti puncture suit jacket is fluorescent yellow.
6. Material performance of anti puncture layer protective sleeve:
1) The anti puncture clothing and anti puncture layer protective cover should be black, and the four edges of the protective cover should be sealed and evenly sealed.
2) The anti puncture clothing and anti puncture layer protective sleeve material should have a static water pressure resistance performance of level 3 as specified in GB/T4744-2013.
5. The color of the anti puncture suit jacket is fluorescent yellow.
6. Material performance of anti puncture layer protective sleeve:
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}